YCN - mehrere Computer gleichseitig im Netz ?

[Bigswede]

Hallo Forum,

auch wenn das risiko besteht dass meine Frage schon mal besprochen wurde.....

Ich bin kunde bei YCN (ADSL Basic) und habe als Modem dass Speedtouch 510 (Softwareversion 4.2.7.16.0) im verwendung. Wie muss ich das gerät um konfigurieren sodas ich mit mehrere Rechner gleichseitig ins netz kann? Ich habe es soweit verstanden dass ich eine neue Konfigurationsdatei aufspielen muss. In die datei (Siehe unten) muss ich die PrimDNS und SecDNS ändern.

Was muss sonst noch umgestellt werden?

Danke

Markus

[ language.ini ]
config language=en

[ script.ini ]

[ env.ini ]
set var=CONF_REGION value=Austria
set var=CONF_PROVIDER value="AON"
set var=CONF_DESCRIPTION value=Austria
set var=CONF_SERVICE value="Broadband Network Address Translation (NAT)"
set var=CONF_DATE value="Configuration by AleXP"
set var=CONF_VERSION value=1.0
set var=HOST_SETUP value=none
set var=ST_LAN_IP_ADDR value=10.0.0.138
set var=ST_LAN_NET_MASK value=255.255.255.0
set var=COLUMNS value=80
set var=ROWS value=24
set var=SESSIONTIMEOUT value=120
set var=CONF_TPVERSION value=1.2.0
set var=UPGRADE_URL value=http://www.speedtouch.co.uk/upgrade.asp

[ wizard.ini ]

[ snmp.ini ]
config sysContact="Service Provider" sysName="SpeedTouch 510" sysLocation="Customer Premises"

[ phone.ini ]
add name=DIALUP_PPP1 addr=8*48 type=pppoa

[ qos.ini ]
config format=bytes
add name=default class=ubr

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
mode port=dsl0 blocking=enabled
mode port=dsl1 blocking=enabled
mode port=atm2 blocking=enabled
mode port=atm3 blocking=enabled
mode port=aal5 blocking=enabled
mode port=atm5 blocking=enabled

[ pfirewall.ini ]
chain create chain=sink
chain create chain=forward
chain create chain=source
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain=sink
assign hook=source chain=source

[ label.ini ]
chain create chain=user_labels

[ bridge.ini ]
config age=300 filter=no_WAN_broadcast

[ pptp.ini ]
profadd name=default

[ ethoa.ini ]

[ ipoa.ini ]

[ cip.ini ]

[ pppoerelay.ini ]

[ dhcp.ini ]
config autodhcp=off scantime=20 state=enabled trace=off
policy verifyfirst=off trustclient=on
pool add name=LAN_home
pool config name=LAN_home intf=eth0 poolstart=10.0.0.10 poolend=10.0.0.100 netmask=24 gateway=10.0.0.138 server=10.0.0.138 primdns=212.88.160.2 secdns=212.88.160.5 leasetime=7200

[ pppoa.ini ]
ifadd intf=pppoa_DIALUP_PPP1
rtadd intf=pppoa_DIALUP_PPP1 dst=0.0.0.0/0 src=10.0.0.12/24 metric=1
ifconfig intf=pppoa_DIALUP_PPP1 dest=DIALUP_PPP1 accomp=on dnsmetric=0 idle=15 addrtrans=pat
ifconfig intf=pppoa_DIALUP_PPP1 user=user password=password status=down

[ pppoe.ini ]

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=128 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local linksensing=off
ifconfig intf=eth0 mtu=1500 group=lan linksensing=off
ifconfig intf=pppoa_DIALUP_PPP1 mtu=1500 status=down group=wan linksensing=off
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=0.0.0.0/0 intf=eth0 metric=70

[ autoip.ini ]

[ eth.ini ]
ifconfig intf=1 type=auto
config intf=1 state=enabled

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=20

[ dnsd.ini ]
domain domain=lan
start
troff

[ dhcr.ini ]
ifconfig intf=eth0 relay=on trusted=yes
add addr=127.0.0.1 intf=eth0 giaddr=10.0.0.138

[ dhcc.ini ]
config trace=off

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13 trace=off modemoption=00000000000000000000000000000000

[ nat.ini ]
bind application=ESP port=1
bind application=FTP port=ftp
bind application=GRE port=1
bind application=H323 port=h323
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=IRC port=irc-u
bind application=PPTP port=1723
bind application=RAUDIO(PNA) port=realaudio
bind application=RTSP port=rtsp
bind application=SIP port=sip

[ autopvc.ini ]

[ system.ini ]
config upnp=enabled mdap=enabled drst=disabled
config dcache=enabled

[ upnp.ini ]
config maxage=1800 writemode=natonly safenat=enabled

[ endofarch ]

[queez]

schau mal hier:

http://xDSL.at/phpbb2/viewtopic.php?t=1 ... 510+hacken

[Bigswede]

Danke hat erst im x:ten anlauf funktionert.

Danke markus