Braucht mein Modem zuviel Traffic

[maschi]

Hallo,

Da ich mir vor kurzem ein i510 zugelegt hab, hab ich es auch gleich nach der Anleitung hier im Forum konfiguriert. Nur seitdem es läuft, kommt es mir vor als verbräuchte es mehr Traffic als mein USB Modem mit ICS früher. Da mir bei meinem Traffic Limit jeder MB heilig ist, wollt ich einmal fragen ob ich meine Config irgendwie optimiertn kann?

mfg
Maschi






Hier die Config:

[ language.ini ]
config language=en

[ script.ini ]

[ env.ini ]
set var=CONF_REGION value=Austria
set var=CONF_PROVIDER value=AON
set var=CONF_DESCRIPTION value=Austria
set var=CONF_SERVICE value="Broadband Network Address Translation (NAT)"
set var=CONF_DATE value="Configuration modified manually"
set var=CONF_VERSION value=1.0
set var=HOST_SETUP value=none
set var=ST_LAN_IP_ADDR value=10.0.0.138
set var=ST_LAN_NET_MASK value=255.255.255.0
set var=COLUMNS value=80
set var=ROWS value=24
set var=SESSIONTIMEOUT value=120
set var=CONF_TPVERSION value=1.2.0
set var=UPGRADE_URL value=http://www.speedtouch.co.uk/upgrade.asp

[ wizard.ini ]

[ snmp.ini ]
config sysContact="Service Provider" sysName="SpeedTouch 510" sysLocation="Customer Premises"

[ phone.ini ]
add name=DIALUP_PPP1 addr=8*48 type=pppoa

[ ipqos.ini ]
config dest=DIALUP_PPP1
queue config dest=DIALUP_PPP1 queue=0
queue config dest=DIALUP_PPP1 queue=1
queue config dest=DIALUP_PPP1 queue=2
queue config dest=DIALUP_PPP1 queue=3

[ qos.ini ]
config format=bytes
add name=default class=ubr

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
mode port=dsl0 blocking=enabled
mode port=dsl1 blocking=enabled
mode port=atm2 blocking=enabled
mode port=atm3 blocking=enabled
mode port=aal5 blocking=enabled
mode port=atm5 blocking=enabled

[ pfirewall.ini ]
chain create chain=sink
chain create chain=forward
chain create chain=source
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain=sink
assign hook=source chain=source

[ label.ini ]
chain create chain=user_labels

[ bridge.ini ]
config age=300 filter=no_WAN_broadcast

[ pptp.ini ]
profadd name=default

[ ethoa.ini ]

[ ipoa.ini ]

[ cip.ini ]

[ pppoerelay.ini ]

[ dhcp.ini ]
config autodhcp=off scantime=20 state=enabled trace=off
policy verifyfirst=off trustclient=on
pool add name=LAN_home
pool config name=LAN_home intf=eth0 poolstart=10.0.0.10 poolend=10.0.0.100 netmask=24 gateway=10.0.0.138 server=10.0.0.138 primdns=195.58.160.2 secdns=195.58.161.3 leasetime=7200

[ pppoa.ini ]
ifadd intf=pppoa_DIALUP_PPP1
rtadd intf=pppoa_DIALUP_PPP1 dst=0.0.0.0/0 src=10.0.0.10/24 metric=1
ifconfig intf=pppoa_DIALUP_PPP1 dest=DIALUP_PPP1 accomp=on dnsmetric=0 idle=15 addrtrans=pat
ifconfig intf=pppoa_DIALUP_PPP1 user= password= status=up

[ pppoe.ini ]

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=128 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local linksensing=off
ifconfig intf=eth0 mtu=1500 group=lan linksensing=off
ifconfig intf=pppoa_DIALUP_PPP1 mtu=1500 group=wan linksensing=off
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=0.0.0.0/0 intf=eth0 metric=70

[ autoip.ini ]

[ eth.ini ]
ifconfig intf=1 type=auto
config intf=1 state=enabled

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=20

[ dnsc.ini ]
config qrytout=5 interval=10 qryretry=3 attempt=-1 search=on connection=permanent
add addr=127.0.0.1 port=53

[ dnsd.ini ]
domain domain=lan
add hostname=marschall addr=10.0.0.10
start
troff

[ dhcr.ini ]
ifconfig intf=eth0 relay=on trusted=yes
add addr=127.0.0.1 intf=eth0 giaddr=10.0.0.138

[ dhcc.ini ]
config trace=off

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13 trace=off modemoption=00000000000000000000000000000000

[ nat.ini ]
bind application=ESP port=1
bind application=FTP port=ftp
bind application=GRE port=1
bind application=H323 port=h323
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=IRC port=irc-u
bind application=PPTP port=1723
bind application=RAUDIO(PNA) port=realaudio
bind application=RTSP port=rtsp
bind application=SIP port=sip
create protocol=tcp inside_addr=0.0.0.0:5190 outside_addr=0.0.0.0:5190 foreign_addr=0.0.0.0:0

[ autopvc.ini ]
config mode=pseudo opmode=partial overwrite=disabled peakrate=0

[ system.ini ]
setpassword userid= password= hash2= config upnp=enabled mdap=enabled drst=disabled
config dcache=enabled

[ upnp.ini ]
config maxage=1800 writemode=natonly safenat=enabled

[ endofarch ]

[varg]

Also auf http://www.univie.ac.at/ZID/anleitungen/adsl-router/ steht

Bitte beachten Sie, daß das ADSL-Modem als Router im Monat ca. 30 MB Transfervolumen verursacht, wenn es ständig eingeschalten und verbunden ist. Um dieses Transfervolumen zu verringern, schalten Sie das Modem aus, wenn Sie es nicht benötigen.

Also die 30MB werden ja wohl nicht so schlimm sein, oder?

[radditz]

set var=UPGRADE_URL value=http://www.speedtouch.co.uk/upgrade.asp

mach das mal weg, is sicher net wichtig, dass er automatisch nach updates sucht, solang das ding eh stabil lläuft, und es könnte dadurch traffic entstehen.