Probleme bei Cisco Router 761 mit Complete

[333]

Weil mein ELSA ISDN-Router defekt wurde, habe ich einen Cisco Router 761
ersteigert. Entsprechend diverser Konfigurationsbeispiele im Internet habe
ich ihn für die Einwahl bei AonComplete vorbereitet, bei der Einwahl werde
ich aber immer vom Remote-Geräte (= Complete) rausgeschmissen. Was wirklich
dahinter steckt kann ich nicht feststellen, ich vermute es funktioniert die
Passwort-Ãœbergabe nicht richtig. Der Useraccount und das Kennwort sind sicher
richtig, ich habe beide mehrmals geschrieben, auch mit Copy/Paste funktioniert
es nicht.
Ich bitte um Untestützung. Vielleicht verwendet jemand auch die Kombination
Cisco 761 mit AonComplete und kann mir die Routerkonfiguration schicken? Oder
fällt jemandem ein Fehler in meiner Konfiguration auf?
Unten sind die Fehlermeldung beim Dial-In, die Router Software-Version sowie
die Router Konfiguration aufgelistet.

Wenn jemand eine Idee hat, schreibt mir bitte an: [email protected]

Danke im voraus!

333

------------------------------------------------------------------------------

*********** F E H L E R M E L D U N G:

cisco760> 10/25/2004 21:19:56 L05 0 0194040 Outgoing Call Initiated
cisco760> 10/25/2004 21:19:58 L08 1 0194040 Call Connected
cisco760> 10/25/2004 21:20:16 L12 1 Disconnected Remotely
Cause 31 Normal Unspecified
cisco760> 10/25/2004 21:20:16 L27 1 Disconnected
cisco760>

------------------------------------------------------------------------------

*********** V E R S I O N:

cisco760> version
Software Version c760-in.r.NET3 4.3(1) - Feb 22 1999 19:36:11
Cisco 761
ISDN Stack Revision NET3 2.10
Copyright (c) 1993-1999 by Cisco Systems, Inc. All rights reserved.
Software is used subject to software license agreement contained
with this product. By using this product you agree to accept the
terms of the software license.
Hardware Configuration:
DRAM: 1.5MB
Flash: 0.5MB
POTS: Not Installed
NT1: Not Installed
ROM: 2.1(1)
cisco760>

------------------------------------------------------------------------------

*********** K O N F I G U R A T I O N:

CD
SET SCREENLENGTH 20
SET COUNTRYGROUP 1
SET LAN MODE ANY
SET WAN MODE ONLY
SET AGE OFF
SET MULTIDESTINATION OFF
SET SWITCH NET3
SET ALAWVOICE ON
SET INTERNALTONES NONE
SET 1 DELAY 30
SET 2 DELAY 30
SET BRIDGING ON
SET LEARN ON
SET PASSTHRU OFF
SET SPEED AUTO
SET PLAN NORMAL
SET 1 AUTO ON
SET 2 AUTO ON
SET 1 NUMBER
SET 2 NUMBER
SET 1 BACKUPNUMBER
SET 2 BACKUPNUMBER
SET 1 RINGBACK
SET 2 RINGBACK
SET 1 CLIVALIDATENUMBER
SET 2 CLIVALIDATENUMBER
SET CLICALLBACK OFF
SET CLIAUTHENTICATION OFF
SET SYSTEMNAME cisco760
LOG CALLS TIME VERBOSE
SET UNICASTFILTER OFF
DEMAND 1 THRESHOLD 0
DEMAND 2 THRESHOLD 48
DEMAND 1 DURATION 1
DEMAND 2 DURATION 1
DEMAND 1 SOURCE LAN
DEMAND 2 SOURCE BOTH
TIMEOUT 1 THRESHOLD 0
TIMEOUT 2 THRESHOLD 48
TIMEOUT 1 DURATION 0
TIMEOUT 2 DURATION 0
TIMEOUT 1 SOURCE LAN
TIMEOUT 2 SOURCE BOTH
SET AOCDTIMEOUT OFF
SET PASSWORD SYSTEM ENCRYPTED xxxxxxxx <-- **** manuell entfernt ****
SET REMOTEACCESS PROTECTED
SET LOCALACCESS PROTECTED
SET LOGOUT 5
SET CALLERID OFF
SET PPP AUTHENTICATION IN CHAP PAP
SET PPP CHAPREFUSE NONE
SET PPP CHAPALLOW MULTIHOST OFF
SET PPP AUTHENTICATION OUT NONE
SET PPP AUTHENTICATION ACCEPT EITHER
SET PPP TAS CLIENT 0.0.0.0
SET PPP TAS CHAPSECRET LOCAL ON
SET PPP CALLBACK REQUEST OFF
SET PPP CALLBACK REPLY OFF
SET PPP NEGOTIATION INTEGRITY 10
SET PPP NEGOTIATION COUNT 10
SET PPP NEGOTIATION RETRY 3000
SET PPP TERMREQ COUNT 2
SET PPP MULTILINK OFF
SET PPP MULTILINK PPPHEADER ON
SET COMPRESSION STAC
SET PPP BACP ON
SET PPP ADDRESS NEGOTIATION LOCAL OFF
SET PPP IP NETMASK LOCAL OFF
SET IP PAT UDPTIMEOUT 5
SET IP PAT TCPTIMEOUT 30
SET IP RIP TIME 30
SET CALLDURATION 0
SET SNMP CONTACT ""
SET SNMP LOCATION ""
SET SNMP TRAP COLDSTART OFF
SET SNMP TRAP WARMSTART OFF
SET SNMP TRAP LINKDOWN OFF
SET SNMP TRAP LINKUP OFF
SET SNMP TRAP AUTHENTICATIONFAIL OFF
SET DHCP SERVER
SET DHCP ADDRESS 192.168.20.1 50
SET DHCP LEASETIME 41000
SET DHCP NETMASK 255.255.0.0
SET DHCP DNS PRIMARY 195.3.96.67
SET DHCP DNS SECONDARY 195.3.96.68
SET DHCP DOMAIN wai
SET DHCP GATEWAY PRIMARY 192.168.20.100
SET DHCP NETBIOS_SCOPE
SET CALLTIME VOICE INCOMING OFF
SET CALLTIME VOICE OUTGOING OFF
SET CALLTIME DATA INCOMING OFF
SET CALLTIME DATA OUTGOING OFF
SET USER LAN
SET BRIDGING OFF
SET IP ROUTING ON
SET IP ADDRESS 192.168.20.100
SET IP NETMASK 255.255.255.0
SET IP FRAMING ETHERNET_II
SET IP PROPAGATE ON
SET IP COST 1
SET IP RIP RECEIVE V1
SET IP RIP UPDATE OFF
SET IP RIP VERSION 1
SET IP FILTER UDP IN SOURCE 0.0.0.0/0:137-139 BLOCK
SET IP FILTER TCP IN DESTINATION 0.0.0.0/0:135-139 BLOCK
SET USER Internal
SET IP FRAMING ETHERNET_II
SET USER Standard
SET PROFILE ID 000000000000
SET PROFILE POWERUP ACTIVATE
SET PROFILE DISCONNECT KEEP
SET IP ROUTING ON
SET IP ADDRESS 0.0.0.0
SET IP NETMASK 0.0.0.0
SET IP FRAMING NONE
SET IP RIP RECEIVE V1
SET IP RIP UPDATE OFF
SET IP RIP VERSION 1
SET USER INTERNET
SET PROFILE ID 000000000000
SET PROFILE POWERUP ACTIVATE
SET PROFILE DISCONNECT KEEP
SET BRIDGING OFF
SET 1 NUMBER 0194040
SET 2 NUMBER 0194040
TIMEOUT 1 DURATION 60
TIMEOUT 2 DURATION 60
SET PPP CLIENTNAME xxxxxxxx <-- **** manuell entfernt ****
SET PPP PASSWORD CLIENT ENCRYPTED xxxxxxxx <-- **** manuell entfernt ****
SET PPP ADDRESS NEGOTIATION LOCAL ON
SET IP ROUTING ON
SET IP ADDRESS 0.0.0.0
SET IP NETMASK 0.0.0.0
SET IP FRAMING NONE
SET IP RIP RECEIVE V1
SET IP RIP UPDATE OFF
SET IP RIP VERSION 1
SET IP PAT ON
SET IP ROUTE DEST 0.0.0.0/0 GATEWAY 0.0.0.0 PROPAGATE OFF COST 1
CD
LOGOUT

------------------------------------------------------------------------------

[triple25]

Bist du hinter einer telefonanlage?

[triple25]

funkt der 761 er schon?