xDSL.at

[ env.ini ]
set var="CONF_REGION" value="Austria"
set var="CONF_PROVIDER" value="Internet Service Provider"
set var="CONF_DESCRIPTION" value="Austria (ST510 v4.0: PPPoA with NAT)"
set var="CONF_SERVICE" value="Broadband Access (ST510 v4.0)"
set var="CONF_DATE" value="June 2003"
set var="CONF_VERSION" value="0.1"
set var="HOST_SETUP" value="none"
set var="ST_LAN_IP_ADDR" value="10.0.0.138"
set var="ST_LAN_NET_MASK" value="255.255.255.0"

[ phone.ini ]
add name=usb_port addr=usb.8.48 type=any logging=no
add name="Br1" addr=8*35 type=ethoa
add name="Br2" addr=8*36 type=ethoa
add name="Br3" addr=8*37 type=ethoa
add name="Br4" addr=8*38 type=ethoa
add name="RELAY_PPP2" addr=8*49 type=pppoa
add name="RELAY_PPP3" addr=8*50 type=pppoa
add name="RELAY_PPP4" addr=8*51 type=pppoa
add name="DIALUP_PPP1" addr=8*48 type=pppoa

[ qos.ini ]
add name="default" class=ubr

[ bridge.ini ]
ifadd intf="Br1" dest=Br1
ifconfig intf=Br1 encaps=llc/snap portstate=forwarding
ifattach intf=Br1
ifadd intf="Br2" dest=Br2
ifconfig intf=Br2 encaps=llc/snap portstate=forwarding
ifattach intf=Br2
ifadd intf="Br3" dest=Br3
ifconfig intf=Br3 encaps=llc/snap portstate=forwarding
ifattach intf=Br3
ifadd intf="Br4" dest=Br4
ifconfig intf=Br4 encaps=llc/snap portstate=forwarding
ifattach intf=Br4
ifadd intf=usb_bridge dest=usb_port logging=no
ifattach intf=usb_bridge logging=no
config age=300

[ pptp.ini ]
profadd name="default" encaps=vcmux

[ dhcp.ini ]
config autodhcp=on scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
pool add name="LAN_private"
pool config name=LAN_private poolstart=192.168.1.1 poolend=192.168.1.254 netmask=24 leasetime=7200
start

[ mer.ini ]

[ ipoa.ini ]

[ ppp.ini ]
ifadd intf="DIALUP_PPP1"
rtadd intf=DIALUP_PPP1 dst=0.0.0.0/0 src=0.0.0.0/0 metric=1
ifconfig intf=DIALUP_PPP1 dest=DIALUP_PPP1 proto=pppoa encaps=vcmux pap=off addrtrans=pat
ifconfig intf=DIALUP_PPP1 pcomp=on accomp=on passive=off silent=off echo=on
ifconfig intf=DIALUP_PPP1 restart=on demanddial=on idle=300
ifconfig intf=DIALUP_PPP1 user="0lafsUser" password="0lafsPwd" savepwd=on
ifconfig intf=DIALUP_PPP1 trace=on status=up

[ cip.ini ]

[ pfilter.ini ]

[ pfirewall.ini ]
chain create chain="sink"
chain create chain="forward"
chain create chain="source"
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain="sink"
assign hook=forward chain="forward"
assign hook=source chain="source"

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=192.168.1.252/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=DIALUP_PPP1 mtu=1500 status=up group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=192.168.1.0/24 gateway=192.168.1.252
rtadd dst=255.255.255.255/32 gateway=192.168.1.252
rtadd dst=192.168.1.0/24 src=192.168.1.0/24 gateway=192.168.1.252

[ autoip.ini ]

[ eth.ini ]


[ dnsd.ini ]
domain domain="lan"
add hostname="SpeedTouch"
start
troff

[ dhcc.ini ]
config trace=off
ifadd intf=eth0
ifconfig intf=eth0 addrtrans=none dns=on gateway=on metric=1
ifattach intf=eth0

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ adslisdn.ini ]
config opermode=multimode maxbitspertoneUS=13

[ upnp.ini ]
config maxage=1800

[ nat.ini ]
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=H323 port=h323
bind application=FTP port=ftp
bind application=RTSP port=rtsp
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=realaudio

[ system.ini ]
setpassword userid=wurzel password=_CYP_0xwtqHa5o2RAE hash2=336e94eb987e0d2cdf4f26f1acdcdc7c
config upnp=enabled mdap=enabled drst=enabled
config dcache=enabled

[ endofarch ]

wahrscheinlich nur einen teil der anleitung beachtet und befolgt. damit dein modem einwaehlen kann,musst du username + passwort eintragen

ifconfig intf=DIALUP_PPP1 user="0lafsUser" password="0lafsPwd" savepwd=on

alles sichern und auf verbinden klicken.

0laf hat geschrieben:Ist vielleicht der Fehler dass ich die IP des modems direkt in der Konfigurationsdatei geändert habe (von 10.0.0.138 auf 192.168.1.252)?