Geht, eigentlich, recht einfach.
Zuerst ein Backup der derzeitigen Config machen.
Dann kopierst Dir den nachfolgenden Code in eine Datei. Muss zwingend die Endung INI haben und eine Leerzeile am Ende.
Diese dann in den SpeedTouch uploaden, noch deine UserID und Kennwort eingeben, Connect anglickt und SaveAll.
Als DNS-Server sind die der UNI-Wien eingestellt und werden vom DHCP-Server auch brav durchgereicht.
Dem NetGear sagst dann einfach IP automatisch beziehen und kein Login benoetigt. Das wars auch schon.
Hope it works,
Adi
[ env.ini ]
set var="CONF_REGION" value="Austria"
set var="CONF_PROVIDER" value="Internet Service Provider"
set var="CONF_DESCRIPTION" value="Austria"
set var="CONF_SERVICE" value="Broadband Network, configured as Router (NAT)"
set var="CONF_DATE" value="SEP 2003"
set var="CONF_VERSION" value="0.1"
set var="HOST_SETUP" value="none"
set var="ST_LAN_IP_ADDR" value="10.0.0.138"
set var="ST_LAN_NET_MASK" value="255.255.255.0"
set var="COLUMNS" value="80"
set var="ROWS" value="24"
set var="SESSIONTIMEOUT" value="120"
[ phone.ini ]
add name="DIALUP_PPP1" addr=8*48 type=pppoa
[ qos.ini ]
add name="default" class=ubr
[ oam.ini ]
config clp=1
[ bridge.ini ]
config age=300
[ pptp.ini ]
profadd name="default"
[ dhcp.ini ]
config autodhcp=off scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10
pool add name="Pool1"
pool config name=Pool1 poolstart=10.0.0.140 poolend=10.0.0.150 netmask=24 gateway=10.0.0.138 primdns=131.130.1.11 secdns=131.130.1.12 leasetime=7200
start
[ mer.ini ]
[ ipoa.ini ]
[ ppp.ini ]
ifadd intf="DIALUP_PPP1"
rtadd intf=DIALUP_PPP1 dst=0.0.0.0/0 src=10.0.0.140/24 metric=1
ifconfig intf=DIALUP_PPP1 dest=DIALUP_PPP1 proto=pppoa accomp=on demanddial=on idle=180 addrtrans=pat
ifconfig intf=DIALUP_PPP1 user="enter your UserID" password=PWD status=down
[ cip.ini ]
[ pfilter.ini ]
[ pfirewall.ini ]
chain create chain="sink"
chain create chain="forward"
chain create chain="source"
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain="sink"
assign hook=forward chain="forward"
assign hook=source chain="source"
[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=DIALUP_PPP1 mtu=1500 group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=10.0.0.0/24 src=10.0.0.138/32 gateway=10.0.0.138 metric=1
[ autoip.ini ]
[ eth.ini ]
ifconfig intf=0 type=auto
[ dnsd.ini ]
domain domain="unsecure.com"
start
troff
[ dhcc.ini ]
config trace=off
[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13
[ upnp.ini ]
config maxage=1800
[ nat.ini ]
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=H323 port=h323
bind application=FTP port=ftp
bind application=RTSP port=rtsp
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=realaudio
enable addr=212.152.237.183 type=pat
[ system.ini ]
config upnp=disabled mdap=enabled dcache=enabled
[ endofarch ]
