Fehlermeldung bei Alcatel 510 setup

[investigator]

hallo allerseits

habe AUCH ein alcatel 510 + router funktion, und will über lan mit mehreren PCs ins internet hat bis jetzt auch funktioniert mit einer config die ich aus tschechien aufgetrieben hab, allerdings hat die verbindung heute den geist aufgegeben. wenn ich die config uploade kommt folgender upload bericht:

Warning: $DSL_ADDR not found, parameter addr ignored.
addr option required
Invalid phonebook destination name.
Bad value for parameter 'dest'
Failed to attach PPP interface.
Invalid interface name specified
Bad value for parameter 'intf'


*** configuration loaded successfully ***

anfangs wars mir wurscht weils ja trotzdem funktioniert hat. jetzt gehts nicht mehr , auch wenn ich das modem resette und die config DANN raufspiele
leider gottes bin ich eine lan + internet niete und habe keine ahnung von dem zeug das im bericht erwähnt wird.
ich füege die config bei:
BITTE HELFT MIR !!!!!

[ env.ini ]
set var=CONF_REGION value="Austria"
set var=CONF_PROVIDER value="Internet Service Provider"
set var=CONF_DESCRIPTION value="Routed PPPoA configuration VPI=8,VCI=48"
set var=CONF_SERVICE value="PPP over ATM"
set var=CONF_DATE value="December 2002"
set var=CONF_VERSION value="0.1"
set var=HOST_SETUP value="auto shortcut"
set var=UPGRADE_URL value="http://www.speedtouch.com/upgrade500.htm"

'setting of env variables for use without wizard
'-----------------------------------------------
set var=PPPoA_userid value=""
set var=PPPoA_passwrd value=""
set var=passwrd value=""

'Definition of groups
'--------------------
'Definition of PPPoA group
def var=PPPoA type=grp desc="Specify the details of the Routed PPPoA Packet Service. All information should be provided by your ISP." alias="Routed PPPoA Packet Service"
'Definition of password group
def var=passwdgrp type=grp desc="Specify your user name and password to protect your SpeedTouch." alias="SpeedTouch security"


'PPPoA group
'-----------
'Variable DSL_ADDR
def var=DSL_ADDR type=combo grp=PPPoA alias="VPI/VCI" data=8*48 default="8*48" req desc="Enter the VPI/VCI value you want to use or select one from the list. These values should be provided by your ISP."
'variable PPPoA_userid
def var=PPPoA_userid type=string grp=PPPoA alias="User Name" req desc="Enter your user name for PPP connection."
'variable PPPoA_passwrd
def var=PPPoA_passwrd type=passw grp=PPPoA alias="Password" req desc="Enter your password for PPP connection."


'password group
'--------------
'variable userid
def var=userid type=string grp=passwdgrp alias="User Name" desc="Enter a SpeedTouch user name."
'variable passwrd
def var=passwrd type=passw grp=passwdgrp alias="Password" desc="Enter a SpeedTouch System Password."

[ phone.ini ]
add name=pppoa addr=$DSL_ADDR type=pppoa


[ qos.ini ]
add name=default class=ubr tx_peakrate=0

[ bridge.ini ]
config age=300

[ brfilter.ini ]

[ pptp.ini ]

[ dhcp.ini ]
config autodhcp=off scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10
pool add name=LAN_private
pool config name=LAN_private poolstart=10.0.0.1 poolend=10.0.0.254 netmask=8 leasetime=7200
start

[ mer.ini ]

[ ipoa.ini ]

[ ppp.ini ]
ifadd intf=pppoa
rtadd intf=pppoa dst=0.0.0.0/0 src=10.0.0.0 srcmsk=1
ifconfig intf=pppoa dest=pppoa user=$PPPoA_userid password=$PPPoA_passwrd
proto=pppoa accomp=on addrtrans=pat restart=on status=up
ifattach intf=pppoa

[ cip.ini ]

[ nat.ini ]
bind application=H323 port=1720
bind application=FTP port=ftp
bind application=RTSP port=554
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=7070
bind application=ILS port=ldap
bind application=ILS port=1002
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=500

[ pfilter.ini ]

[ pfirewall.ini ]
chain create chain=sink
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=68 action=accept
rule create chain=sink index=3 action=drop
chain create chain=forward
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
chain create chain=source
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=67 action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=static mssclamping=on
apadd addr=10.0.0.138/8 intf=eth0 addroute=yes type=1
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=ppp mtu=1500 group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=255.255.255.255/32 intf=eth0

[ autoip.ini ]
ifadd intf=eth0
ifconfig intf=eth0 poolstart=169.254.1.1 poolend=169.254.254.254 netmask=16
ifattach intf=eth0

[ eth.ini ]
ifconfig intf=0 type=auto

[ dnsd.ini ]
domain domain=lan
add hostname=SpeedTouch
start
troff

[ dhcc.ini ]
config trace=off

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ adslisdn.ini ]
config opermode=multimode maxbitspertoneUS=13

[ system.ini ]
config upnp=enabled mdap=enabled dcache=enabled
setpassword password=$passwrd

[ endofarch ]

[Aikuchi]

Vielleicht findest Du was unter dem folgenden Link:
(schon wieder bei Loadhelmchen geklaut - ist aber auch wirklich viel zum Thema 510er dort zu finden!)

http://xdsl.at/phpbb2/viewtopic.php?t=20573&highlight=

[investigator]

aha hab das config file von deinem link benutzt
jetzt is alles pippifein....super
Danke !!!!!