Netgear RT314 Router Konfiguration + AON
Verfasst: Fr 07 Sep, 2001 17:50<HTML>Hallo,
Wer weiss, wie ich meine Netgear RT 314 ADSL Router konfigurieren muss, sodass er mit AON funktioniert ?
Habe das Teil wie folgt im Menü konfiguriert, es baut jedoch keine Verbindung zum Alcatel DSL Modem auf. Kann nur den Router pingen, aber nicht das Modem.
Wer hat ein passendes Konfigurations -file ??
Menu 4 - Internet Access Setup
ISP's Name= ADSL
Encapsulation= PPTP
Service Type= N/A
My Login= my Login
My Password= my Password
Idle Timeout= 300
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Single User Account= Yes
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 10.0.0.1
Size of Client IP Pool= 140
Primary DNS Server= 195.3.96.67
Secondary DNS Server= 195.3.96.68
TCP/IP Setup:
IP Address= 10.0.0.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Menu 11.1 - Remote Node Profile
Rem Node Name= ADSL Route= IP
Active= Yes
Encapsulation= PPTP Edit IP= No
Service Type= Standard Telco Option:
Service Name= N/A Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login=
My Password=
Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 300
PPTP:
My IP Addr= 10.0.0.140
Server IP Addr= 10.0.0.138
Connection ID/Name=
thx,
rja</HTML>
Wer weiss, wie ich meine Netgear RT 314 ADSL Router konfigurieren muss, sodass er mit AON funktioniert ?
Habe das Teil wie folgt im Menü konfiguriert, es baut jedoch keine Verbindung zum Alcatel DSL Modem auf. Kann nur den Router pingen, aber nicht das Modem.
Wer hat ein passendes Konfigurations -file ??
Menu 4 - Internet Access Setup
ISP's Name= ADSL
Encapsulation= PPTP
Service Type= N/A
My Login= my Login
My Password= my Password
Idle Timeout= 300
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Single User Account= Yes
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 10.0.0.1
Size of Client IP Pool= 140
Primary DNS Server= 195.3.96.67
Secondary DNS Server= 195.3.96.68
TCP/IP Setup:
IP Address= 10.0.0.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Menu 11.1 - Remote Node Profile
Rem Node Name= ADSL Route= IP
Active= Yes
Encapsulation= PPTP Edit IP= No
Service Type= Standard Telco Option:
Service Name= N/A Allocated Budget(min)= 0
Outgoing: Period(hr)= 0
My Login=
My Password=
Session Options:
Authen= CHAP/PAP Edit Filter Sets= No
Idle Timeout(sec)= 300
PPTP:
My IP Addr= 10.0.0.140
Server IP Addr= 10.0.0.138
Connection ID/Name=
thx,
rja</HTML>