Sloange ich keine deutsche anleitung zur ummodelung fĂĽr die Pro version finde
wird´s doch ein router (wie sieht´s aus wenn man das modem wieder zurückgeben möchte, bekommt man doch probleme wenn das modem modifiziert wurde)
könnte mir jemand bitte die oben gestelten fragen zum usr8000 beantworten!
r.
verwendet jemand Router + Jet2WEb ADSL???
Forumsregeln
Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).
Diskussionen ĂĽber Provider (deren Produkte und Dienstleistungen) werden im Bereich PROVIDER gefĂĽhrt.
Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).
Diskussionen ĂĽber Provider (deren Produkte und Dienstleistungen) werden im Bereich PROVIDER gefĂĽhrt.
25 Beiträge
• Seite 2 von 2 • 1, 2
RE: verwendet jemand Router + Jet2WEb ADSL???
von Edi » Mo 25 Mär, 2002 19:53
Kann man das Modem falls es nicht funktioniert wieder auf Werkseinstellung zurĂĽckstellen, weiĂźt du das?
- Edi
RE: verwendet jemand Router + Jet2WEb ADSL???
von Manuel Capellari » Mo 25 Mär, 2002 19:53
das modem zu patchen is sowieso mĂĽll, ein router is gscheiter ...
- Manuel Capellari
RE: verwendet jemand Router + Jet2WEb ADSL???
von test » Mo 25 Mär, 2002 21:40
warum missbraucht ihr meine threads immer fĂĽr allerhand mĂĽll??
wäre super wenn mal die frage beantwortet werden würde
mit welchen routern Jet2WEb ADSL garantiert funzt!!
mfg
test
wäre super wenn mal die frage beantwortet werden würde
mit welchen routern Jet2WEb ADSL garantiert funzt!!
mfg
test
- test
RE: verwendet jemand Router + Jet2WEb ADSL???
von Manuel Capellari » Mo 25 Mär, 2002 21:59
mit so ziemlich jedem der pptp fähig ist ...
z.b. planet rt 101a
netgear 311
zyxel prestige 311
...
z.b. planet rt 101a
netgear 311
zyxel prestige 311
...
- Manuel Capellari
RE: verwendet jemand Router + Jet2WEb ADSL???
von Madtom » Mo 25 Mär, 2002 23:56
@Edi Brauchst nur auf der RĂĽckseite vom Modem den Reset - Knopf drĂĽcken und alles ist wieder beim Alten.
mfg Madtom
mfg Madtom
- Madtom
RE: verwendet jemand Router + Jet2WEb ADSL???
von Tom » Di 26 Mär, 2002 11:29
@Madtom Leider nicht, wenn du wiriklich die Pro Features und sämtliche Konfigurationen änderst hilft Reset nicht mehr
- Tom
RE: verwendet jemand Router + Jet2WEb ADSL???
von Raphael » Di 26 Mär, 2002 17:25
und wie sieht´s nun mit´m usr 8000 aus ???
- Raphael
RE: verwendet jemand Router + Jet2WEb ADSL???
von Raphael » Di 26 Mär, 2002 23:01
<HTML>
U.S. Robotics® Broadband Router
Model #8000
With the U.S. Robotics Broadband Router, you can share broadband Internet access with four PCs right out of the box – share your Broadband Router with up to 253 PCs by simply adding Ethernet hubs. These networked computers can share a single Internet connection, data files, even music and multi-player games. And there's also the added security of a built-in firewall to prevent outside intrusion. An integrated print server allows multiple PCs to easily share one printer – no dedicated PC is required. The built-in serial port allows you to add an analog modem to maintain your connectivity for backup Internet access. All this from the brand name you've already come to trust and rely upon – U.S. Robotics.
The U.S. Robotics Broadband Router offers all the features and functionality you've come to trust – speed, reliability, quality, and durability. As with all U.S. Robotics products, you will find the installation and configuration of the U.S. Robotics Broadband Router simple. The Installation Essentials CD makes setup a snap, and the HTML Web-based configuration utility will make this process even easier!
Key Benefits
Share the Internet.
Share your Internet connection with as many PCs as you have in home or office. With additional hubs, the U.S. Robotics Broadband Router can handle up to 253 PCs – that's expandability!
Integrated firewall for security.
Protect your privacy and the integrity of your network with the integrated firewall.
With the built-in print server, you won't need a dedicated PC to handle your print jobs.
The built-in print server allows multiple PCs to use the shared resources of a single printer without the need to have a dedicated PC.
Features
Share one Internet connection* across multiple PCs
Integrated firewall for security
Built-in print server – no dedicated PC required
(4) 10/100 Mbps Ethernet ports
(1) uplink port – connect additional hubs to add more PCs using standard Ethernet cables
Additional port to connect an analog modem for backup Internet access
PC and Macintosh compatible**
Works with any Cable/DSL Internet service
Ideal for multiple PC homes, home offices, or small businesses
Specifications and Standards
Compliant with IEEE 802.3, IEEE 802.3u
One RJ-45, 10 Mbps Ethernet WAN port
Four RJ-45, 10/100 Mbps Ethernet LAN ports
One RJ-45, 10/100 Mbps Ethernet uplink port
Parallel port connector for integrated print server
RS-232 port for console or backup modem
Reset Button reloads factory configuration
NAT firewall
Static and dynamic routing with packet filtering
DHCP server (LAN) and client (WAN)
PPP over Ethernet (PPPoE) support
VPN pass through support for both L2TP and PPTP <============
Up to 253 clients (with additional hubs)
System Requirements
PC or Macintosh with Ethernet network connection (Network Interface Card)
Print server support for Windows 95/98/NT 4.0/2000/Me/XP
Internet access – a Cable or DSL modem with Ethernet LAN connection*
500K available hard disk space for utility and driver installation
2x or better CD-ROM drive
---------------------------------------------------
=====> VPN pass through support for both L2TP and PPTP
.
.
.
.
also kunkt´s mit adsl von jet2web !?
---------------------------------------------------</HTML>
U.S. Robotics® Broadband Router
Model #8000
With the U.S. Robotics Broadband Router, you can share broadband Internet access with four PCs right out of the box – share your Broadband Router with up to 253 PCs by simply adding Ethernet hubs. These networked computers can share a single Internet connection, data files, even music and multi-player games. And there's also the added security of a built-in firewall to prevent outside intrusion. An integrated print server allows multiple PCs to easily share one printer – no dedicated PC is required. The built-in serial port allows you to add an analog modem to maintain your connectivity for backup Internet access. All this from the brand name you've already come to trust and rely upon – U.S. Robotics.
The U.S. Robotics Broadband Router offers all the features and functionality you've come to trust – speed, reliability, quality, and durability. As with all U.S. Robotics products, you will find the installation and configuration of the U.S. Robotics Broadband Router simple. The Installation Essentials CD makes setup a snap, and the HTML Web-based configuration utility will make this process even easier!
Key Benefits
Share the Internet.
Share your Internet connection with as many PCs as you have in home or office. With additional hubs, the U.S. Robotics Broadband Router can handle up to 253 PCs – that's expandability!
Integrated firewall for security.
Protect your privacy and the integrity of your network with the integrated firewall.
With the built-in print server, you won't need a dedicated PC to handle your print jobs.
The built-in print server allows multiple PCs to use the shared resources of a single printer without the need to have a dedicated PC.
Features
Share one Internet connection* across multiple PCs
Integrated firewall for security
Built-in print server – no dedicated PC required
(4) 10/100 Mbps Ethernet ports
(1) uplink port – connect additional hubs to add more PCs using standard Ethernet cables
Additional port to connect an analog modem for backup Internet access
PC and Macintosh compatible**
Works with any Cable/DSL Internet service
Ideal for multiple PC homes, home offices, or small businesses
Specifications and Standards
Compliant with IEEE 802.3, IEEE 802.3u
One RJ-45, 10 Mbps Ethernet WAN port
Four RJ-45, 10/100 Mbps Ethernet LAN ports
One RJ-45, 10/100 Mbps Ethernet uplink port
Parallel port connector for integrated print server
RS-232 port for console or backup modem
Reset Button reloads factory configuration
NAT firewall
Static and dynamic routing with packet filtering
DHCP server (LAN) and client (WAN)
PPP over Ethernet (PPPoE) support
VPN pass through support for both L2TP and PPTP <============
Up to 253 clients (with additional hubs)
System Requirements
PC or Macintosh with Ethernet network connection (Network Interface Card)
Print server support for Windows 95/98/NT 4.0/2000/Me/XP
Internet access – a Cable or DSL modem with Ethernet LAN connection*
500K available hard disk space for utility and driver installation
2x or better CD-ROM drive
---------------------------------------------------
=====> VPN pass through support for both L2TP and PPTP
.
.
.
.
also kunkt´s mit adsl von jet2web !?
---------------------------------------------------</HTML>
- Raphael
RE: verwendet jemand Router + Jet2WEb ADSL???
von Manuel Capellari » Di 26 Mär, 2002 23:16
statt hier 10 mal zu fragen ob der nun funktioniert oder nicht hättest du auch die suchfunktion des forums verwenden können
http://ADSL.at/forum/search.php?search= ... dsubject=1>
ich denke das dĂĽrfte deine frage beantworten oder?
http://ADSL.at/forum/search.php?search= ... dsubject=1>
ich denke das dĂĽrfte deine frage beantworten oder?
- Manuel Capellari
25 Beiträge
• Seite 2 von 2 • 1, 2
Wer ist online?
Mitglieder in diesem Forum: Google [Bot] und 112 Gäste