UTA ADSL mit Speedtouch 500 als ROUTER !?!?!?

[VPN]

Hallo Leute !

Habe atm UTA ADSL 3 GB (fair use) und habe dazu ein Speedtouch 500 Modem bekommen.

Hab nun versucht so ein anderes user.ini versucht, aber leider ohne erfolg, kenn mich da leider auch gar nicht aus.

bei einem freund(der hatt mir das file geschickt) wo bei der telekom das internet mit dem selben modem hatt, funzt das.

er braucht sich nicht mal richtig einzuwählen sonder macht IE auf und das macht das modem von selbst, weiters wenn mann sich an den switch hinter dem modem steckt bekommt mann automatisch ne ip und kann das inet gemeinsam nutzen.

tjo, bei mir gehts leider nicht, weil ich es nicht mal schaffe das das modem sich von selber (wenn ich benutzer und passw eingebe) einwählt.

hatt das vielleicht was damit zu tun das ich bei UTA binn ??

oder habt ihr nen anderen tip für mich ??

danke für eure zeit und lg

VPN

[Tom-Wien]

das hängt mit sicherheit damit zusammen das du bei uta bist - denn da sind die vci-werte anders.

deinen benutzernamen hast auch richtig eingebenen?.

poste mal das ini-file.

[VPN]

loa hier isses das file :

[ language.ini ]
config language=de

[ script.ini ]
add name=autopvc_add_qos index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_delete_qos index=0 command="qosbook delete name _auto_$1_$2"
add name=autopvc_add_bridge index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_add_bridge index=1 command="phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes"
add name=autopvc_add_bridge index=2 command="bridge ifadd intf _auto_$1_$2 dest _auto_$1_$2"
add name=autopvc_add_bridge index=3 command="bridge ifconfig intf _auto_$1_$2 qos _auto_$1_$2"
add name=autopvc_add_bridge index=4 command="bridge ifattach intf _auto_$1_$2"
add name=autopvc_delete_bridge index=0 command="bridge ifdetach intf _auto_$1_$2"
add name=autopvc_delete_bridge index=1 command="bridge ifdelete intf _auto_$1_$2"
add name=autopvc_delete_bridge index=2 command="phonebook delete name _auto_$1_$2"
add name=autopvc_delete_bridge index=3 command="qosbook delete name _auto_$1_$2"
add name=autopvc_add_pppoerelay index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_add_pppoerelay index=1 command="phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes"
add name=autopvc_add_pppoerelay index=2 command="ethoa ifadd intf _auto_$1_$2 dest _auto_$1_$2"
add name=autopvc_add_pppoerelay index=3 command="ethoa ifconfig intf _auto_$1_$2 qos _auto_$1_$2"
add name=autopvc_add_pppoerelay index=4 command="ethoa ifattach intf _auto_$1_$2"
add name=autopvc_add_pppoerelay index=5 command="ip ifwait intf _auto_$1_$2 timeout 15 adminstatus up"
add name=autopvc_add_pppoerelay index=6 command="pppoe relay add port _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=0 command="pppoe relay delete port _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=1 command="ethoa ifdetach intf _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=2 command="ethoa ifdelete intf _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=3 command="phonebook delete name _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=4 command="qosbook delete name _auto_$1_$2"
add name=autopvc_change_qos index=0 command="$$1 ifdetach intf $2"
add name=autopvc_change_qos index=1 command="$$1 ifconfig intf $2 qos $3"
add name=autopvc_change_qos index=2 command="$$1 ifattach intf $2"
add name=autopvc_change_qos_pppoerelay index=0 command="ethoa ifdetach intf $1"
add name=autopvc_change_qos_pppoerelay index=1 command="ethoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoerelay index=2 command="ethoa ifattach intf $1"
add name=autopvc_change_qos_pppoerelay index=3 command="pppoe relay add port $1"
add name=autopvc_change_qos_pppoeethoa index=0 command="ethoa ifdetach intf $1"
add name=autopvc_change_qos_pppoeethoa index=1 command="ethoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoeethoa index=2 command="ethoa ifattach intf $1"
add name=autopvc_change_qos_pppoeethoa index=3 command="pppoe ifattach intf $3"
add name=autopvc_change_qos_pppoa index=0 command="pppoa ifdetach intf $1"
add name=autopvc_change_qos_pppoa index=1 command="ip ifwait intf $1 timeout 5 adminstatus down"
add name=autopvc_change_qos_pppoa index=2 command="pppoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoa index=3 command="pppoa ifattach intf $1"

[ env.ini ]
set var=CONF_REGION value=Österreich
set var=CONF_PROVIDER value=Internetdienstanbieter
set var=CONF_DESCRIPTION value="Österreich (März 2004)"
set var=CONF_SERVICE value=Breitbandzugang
set var=CONF_DATE value="An der Konfiguration wurden manuell Änderungen vorgenommen."
set var=CONF_VERSION value=4.2.7.9.0
set var=CONF_TPVERSION value=1.2.0
set var=UPGRADE_URL value=http://www.speedtouch.com/upgrade500.htm
set var=HOST_SETUP value=none
set var=SESSIONTIMEOUT value=60

[ wizard.ini ]
config allow_factory_tpl=no trace=yes autopopup=no

[ snmp.ini ]
config RWCommunity=_DEV_35F8B8D918DE5665 ROCommunity=_DEV_BB9DE4D7E0495825 sysContact="Internet Service Provider" sysName="Speedtouch 510" sysLocation=Austria

[ phone.ini ]
add name=Br1 addr=8*35 type=ethoa
add name=Br2 addr=8*36 type=ethoa
add name=Br3 addr=8*37 type=ethoa
add name=Br4 addr=8*38 type=ethoa
add name=RELAY_PPP1 addr=8*48 type=pppoa
add name=RELAY_PPP2 addr=8*49 type=pppoa
add name=RELAY_PPP3 addr=8*50 type=pppoa
add name=RELAY_PPP4 addr=8*51 type=pppoa
add name=DIALUP_PPP1 addr=8*64 type=pppoa

[ ipqos.ini ]
config dest=Br1 realtimerate=100
config dest=Br2 realtimerate=100
config dest=Br3 realtimerate=100
config dest=Br4 realtimerate=100
config dest=RELAY_PPP1 realtimerate=100
config dest=RELAY_PPP2 realtimerate=100
config dest=RELAY_PPP3 realtimerate=100
config dest=RELAY_PPP4 realtimerate=100
config dest=DIALUP_PPP1 realtimerate=100
queue config dest=Br1 queue=0
queue config dest=Br1 queue=1
queue config dest=Br1 queue=2
queue config dest=Br1 queue=3
queue config dest=Br2 queue=0
queue config dest=Br2 queue=1
queue config dest=Br2 queue=2
queue config dest=Br2 queue=3
queue config dest=Br3 queue=0
queue config dest=Br3 queue=1
queue config dest=Br3 queue=2
queue config dest=Br3 queue=3
queue config dest=Br4 queue=0
queue config dest=Br4 queue=1
queue config dest=Br4 queue=2
queue config dest=Br4 queue=3
queue config dest=RELAY_PPP1 queue=0
queue config dest=RELAY_PPP1 queue=1
queue config dest=RELAY_PPP1 queue=2
queue config dest=RELAY_PPP1 queue=3
queue config dest=RELAY_PPP2 queue=0
queue config dest=RELAY_PPP2 queue=1
queue config dest=RELAY_PPP2 queue=2
queue config dest=RELAY_PPP2 queue=3
queue config dest=RELAY_PPP3 queue=0
queue config dest=RELAY_PPP3 queue=1
queue config dest=RELAY_PPP3 queue=2
queue config dest=RELAY_PPP3 queue=3
queue config dest=RELAY_PPP4 queue=0
queue config dest=RELAY_PPP4 queue=1
queue config dest=RELAY_PPP4 queue=2
queue config dest=RELAY_PPP4 queue=3
queue config dest=DIALUP_PPP1 queue=0
queue config dest=DIALUP_PPP1 queue=1
queue config dest=DIALUP_PPP1 queue=2
queue config dest=DIALUP_PPP1 queue=3

[ qos.ini ]
config format=bytes
add name=default class=ubr framediscard=enabled

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
mode port=dsl0 blocking=enabled
mode port=dsl1 blocking=enabled
mode port=atm2 blocking=enabled
mode port=atm3 blocking=enabled
mode port=aal5 blocking=enabled
mode port=atm5 blocking=enabled

[ pfirewall.ini ]
chain create chain=forward
chain create chain=sink
chain create chain=source
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=icmp icmptype=echo-reply action=accept
rule create chain=sink index=2 prot=icmp icmptype=destination-unreachable action=accept
rule create chain=sink index=3 prot=icmp icmptype=time-exceeded action=accept
rule create chain=sink index=4 prot=udp dstport=dns action=accept
rule create chain=sink index=5 prot=udp dstport=bootpc action=accept
rule create chain=sink index=6 prot=udp dstport=snmp log=yes action=count
rule create chain=sink index=7 action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=icmp icmptype=echo-request action=accept
rule create chain=source index=2 prot=udp dstport=dns action=accept
rule create chain=source index=3 prot=udp dstport=bootps action=accept
rule create chain=source index=4 prot=udp dstport=syslog log=yes action=count
rule create chain=source index=5 prot=udp dstport=snmptrap log=yes action=count
rule create chain=source index=6 prot=udp srcport=snmp log=yes action=count
rule create chain=source index=7 action=drop
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source

[ label.ini ]
add name=BestEffort
add name=HighPriority
add name=MediumPriority
add name=RealTime
config name=BestEffort classification=increase defclass=4 ackclass=4
config name=HighPriority classification=increase defclass=10 ackclass=10
config name=MediumPriority classification=increase defclass=6 ackclass=6
config name=RealTime classification=increase defclass=14 ackclass=14
chain create chain=user_labels

[ bridge.ini ]
ifadd intf=Br1 dest=Br1
ifconfig intf=Br1
ifattach intf=Br1
ifadd intf=Br2 dest=Br2
ifconfig intf=Br2
ifattach intf=Br2
ifadd intf=Br3 dest=Br3
ifconfig intf=Br3
ifattach intf=Br3
ifadd intf=Br4 dest=Br4
ifconfig intf=Br4
ifattach intf=Br4
config age=300 filter=no_WAN_broadcast

[ pptp.ini ]
profadd name=default

[ ethoa.ini ]

[ ipoa.ini ]

[ cip.ini ]

[ pppoerelay.ini ]
add port=eth0

[ dhcp.ini ]
config autodhcp=on scantime=20 state=enabled trace=on
policy verifyfirst=on trustclient=on
pool add name=LAN_private
pool config name=LAN_private intf=eth0 poolstart=10.0.0.1 poolend=10.0.0.254 netmask=24 gateway=10.0.0.138 server=10.0.0.138 leasetime=7200

[ pppoa.ini ]
ifadd intf=DIALUP_PPP1
rtadd intf=DIALUP_PPP1 dst=0.0.0.0/0 src=10.0.0.2/0 metric=1
ifconfig intf=DIALUP_PPP1 dest=DIALUP_PPP1 pcomp=on accomp=on trace=on retryinterval=2 demanddial=on dnsmetric=0 idle=60 idletrigger=Tx addrtrans=pat
ifconfig intf=DIALUP_PPP1 user=Kennung password=_DEV_B195B93F281FE00F status=up

[ pppoe.ini ]

[ ip.ini ]
config forwarding=on firewalling=on redirects=off sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=nat addrcheck=dynamic mssclamping=on
apadd addr=192.168.0.254/24 intf=eth0 addroute=no
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local linksensing=on
ifconfig intf=eth0 mtu=1500 group=lan linksensing=on
ifconfig intf=DIALUP_PPP1 mtu=1500 group=wan linksensing=on
rtadd dst=255.255.255.255/32 gateway=10.0.0.138
rtadd dst=10.0.0.0/24 gateway=10.0.0.138
rtadd dst=192.168.0.0/24 gateway=192.168.0.254 metric=1
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=0.0.0.0/0 intf=eth0 metric=70

[ autoip.ini ]

[ eth.ini ]
ifconfig intf=1 type=auto
config intf=1 state=enabled

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=20

[ dnsc.ini ]
config qrytout=5 interval=10 qryretry=3 attempt=-1 search=on connection=permanent
add addr=127.0.0.1 port=53

[ dnsd.ini ]
domain domain=lan
add hostname=SpeedTouch
start
troff

[ dhcr.ini ]
ifconfig intf=eth0 relay=on
add addr=127.0.0.1 intf=eth0 giaddr=10.0.0.138

[ dhcc.ini ]
config trace=on

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=14 trace=on modemoption=10000000000000000000000000000000

[ nat.ini ]
bind application=ESP port=1
bind application=FTP port=ftp
bind application=GRE port=1
bind application=H323 port=h323
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=IP6TO4 port=1
bind application=IRC port=6660 port_end=6670
bind application=JABBER port=5222
bind application=JABBER port=15222
bind application=PPTP port=1723
bind application=RAUDIO(PNA) port=realaudio
bind application=RTSP port=rtsp
bind application=SIP port=sip
config timeout_TCP_nego=0:1

[ autopvc.ini ]
config mode=active type=bridge opmode=partial overwrite=disabled peakrate=0

[ system.ini ]
config upnp=enabled mdap=enabled drst=enabled
config digestauth=enabled strictusername=enabled dcache=enabled

[ upnp.ini ]
config maxage=1800 defcservice=DIALUP_PPP1 writemode=full safenat=enabled

[ endofarch ]

hoff das hilft

danke und lg